不同管径的Y形微燃烧器内氢气-空气非预混燃烧的火焰传播特性

实验研究了内径分别为1 mm、2 mm和3 mm,水平通道长度为200 mm的Y形微燃烧器内氢气/空气扩散燃烧的火焰传播特性。首先,d=2 mm的燃烧器内的火焰传播模式最为丰富。其次,当燃烧器管径较大时,火焰更容易因扰动而发出噪音。在d=2和3 mm的燃烧器内能观察到两个阶段的噪音,而当d=1 mm时只有一个阶段的噪音。d=2 mm的燃烧器内平均火焰传播速度最小。而且,随着管径的增大,边界火焰更长。值得注意的是,在d=1 mm的燃烧器内,实验观察到了移动的"火焰街"。最后,基于系统的实验观察绘制了八种火焰传播模式的分布图。总之,本文不仅揭示了火焰传播特性与运行参数和尺度效应之间的关系,而且能为Y形微燃烧器的设计和运行提供指导。     

涡轮叶片前缘阵列冲击冷却流动及传热特性数值研究

本文采用SST湍流模型模拟了类前缘通道内蒸汽射流阵列冲击冷却的流动与传热特性,分析了雷诺数(Re=10000~50000)、孔径比(d/H=0.5~0.9)和孔间距比(S/H=2~6)对流动及传热性能的影响规律,得到了相应的传热和摩擦关联式。结果表明:在不同雷诺数下,d/H从0.5到0.9变化时,通道压力损失系数降低了76%~79%,靶面平均努塞尔数降低了45%~49%;S/H从2增至6时,通道压力损失系数增加了1.64~1.92倍,靶面平均努塞尔数增加了54%~64%;增大d/H、减小S/H可有效提高类前缘通道蒸汽冲击冷却的综合热力系数。本文研究结果可为未来先进燃气轮机高温涡轮叶片蒸汽冷却结构的设计提供参考和借鉴。     

Uniform random colored complexes

We present here random distributions on (D + 1)‐edge‐colored, bipartite graphs with a fixed number of vertices 2p. These graphs encode D‐dimensional orientable colored complexes. We investigate the behavior of those graphs as p→∞. The techniques involved in this study also yield a Central Limit Theorem for the genus of a uniform map of order p, as p→∞.     

List star edge coloring of k-degenerate graphs

A star edge coloring of a graph is a proper edge coloring such that every connected 2-colored subgraph is a path with at most 3 edges. Deng et al. and Bezegová et al. independently show that the star chromatic index of a tree with maximum degree $\Delta$ is at most $?\frac{3\Delta }{2}?$, which is tight. In this paper, we study the list star edge coloring of $k$-degenerate graphs. Let $c{h}_{st}^{\prime }\left(G\right)$ be the list star chromatic index of $G$: the minimum $s$ such that for every $s$-list assignment $L$ for the edges, $G$ has a star edge coloring from $L$. By introducing a stronger coloring, we show with a very concise proof that the upper bound on the star chromatic index of trees also holds for list star chromatic index of trees, i.e. $c{h}_{st}^{\prime }\left(T\right)\le ?\frac{3\Delta }{2}?$ for any tree $T$ with maximum degree $\Delta$. And then by applying some orientation technique we present two upper bounds for list star chromatic index of $k$-degenerate graphs.     

Erratum: The average degree of an edge-chromatic critical graph II

In the article “The average degree of an edge-chromatic critical graph II” by Douglas R. Woodall (J. Graph Theory 56 (2007), 194-218), it was claimed that the average degree of an edge-chromatic critical graph with maximum degree $\mathrm{\Delta }$ is at least $\text{◂⋅▸}\frac{2}{3}\left(\mathrm{\Delta }+1\right)$ if $\mathrm{\Delta }⩾2$, at least $\text{◂+▸}\frac{2}{3}\mathrm{\Delta }+1$ if $\mathrm{\Delta }⩾8$, and at least $\text{◂⋅▸}\frac{2}{3}\left(\mathrm{\Delta }+2\right)$ if $\mathrm{\Delta }⩾15$. Unfortunately there were mistakes in the proof of the last two of these results, which are now proved only if $\mathrm{\Delta }⩾18$ and $\mathrm{\Delta }⩾30$, respectively.     

An experimental and computational study of donor–linker–acceptor block copolymers for organic photovoltaics

Block copolymers with donor and acceptor conjugated polymer blocks provide an approach to dictating the donor–accepter interfacial structure and understanding its relationship to charge separation and photovoltaic performance. We report the preparation of a series of donor‐linker‐acceptor block copolymers with poly(3‐hexylthiophene) (P3HT) donor blocks, poly((9,9‐dioctylfluorene)‐2,7‐diyl‐alt‐[4,7‐bis(thiophen‐5‐yl)‐2,1,3‐benzothiadiazole]‐2′,2″‐diyl) (PFTBT) acceptor blocks, and varying lengths of oligo‐ethylene glycol (OEG) chains as the linkers. Morphological analysis shows that the linkers increase polymer crystallinity while a combination of optical and photovoltaic measurements shows that the insertion of a flexible spacer reduces fluorescence quenching and photovoltaic efficiencies of solution processed photovoltaic devices. Density functional theory (DFT) simulations indicate that the linking groups reduce both charge separation and recombination rates, and block copolymers with flexible linkers will likely rotate to assume a nonplanar orientation, resulting in a significant loss of overlap at the donor–linker–acceptor interface. This work provides a systematic study of the role of linker length on the photovoltaic performance of donor–linker–acceptor block copolymers and indicates that linkers should be designed to control both the electronic properties and relative orientations of conjugated polymers at the interface. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1135–1143     

Synthesis and mesomorphic characterization of azoesters with a coumarin ring

We have synthesized a homologous series of azoesters consisting of a coumaryl moiety as the end group. Eleven derivatives of this series exhibit mesomorphism. The nematic mesophase is exhibited from ethyl homologue onward, while the smectic phase commences at the pentyl derivative and is exhibited along with the nematic phase up to the hexadecyl derivative. The N-I transition temperatures curves show the usual odd-even effect. All the compounds in this series are thermally stable and exhibit a wide mesomorphic range of nearly 120°C. Their thermal stabilities and other characteristics are discussed.     

Recent Developments in Flow Injection/Sequential Injection Liquid-Liquid Extraction for Atomic Spectrometric Determination of Metals and Metalloids

Abstract

This review aims to provide a critical overview of automated flow injection and sequential injection liquid-liquid extraction for preconcentration and/or separation of ultra-trace metal and metalloid species hyphenated with atomic spectrometric detection systems, including some new trends and applications in the subbranches of cloud point extraction (CPE), wetting film extraction (WFE), supported liquid membrane extraction (SLME), extraction chromatography (EChr), and liquid-phase microextraction (LPME) techniques. The analytical performance of flow-injection/sequential injection liquid-liquid extraction methods is markedly affected by the components of the flow network such as segmentor, extraction coil, and phase separator. Thus, an overall presentation of system components along with some novel strategies for interface with atomic spectrometers is discussed and exemplified with selected applications.     

On the martingale and free-boundary approaches in sequential detection problems with exponential penalty for delay

We study the connection between the martingale and free-boundary approaches in sequential detection problems for the drift of a Brownian motion, under the assumption of exponential penalty for the delay. By means of the solution of a suitable free-boundary problem, we show that the reward process can be decomposed into the product between a gain function of the boundary point and a positive martingale inside the continuation region.     

A hybrid level set method for modelling detonation and combustion problems in complex geometries

We present an accurate and fast wave tracking method that uses parametric representations of tracked fronts, combined with modifications of level set methods that use narrow bands. Our strategy generates accurate computations of the front curvature and other geometric properties of the front. We introduce data structures that can store discrete representations of the location of the moving fronts and boundaries, as well as the corresponding level set fields, that are designed to reduce computational overhead and memory storage. We present an algorithm we call stack sweeping to efficiently sort and store data that is used to represent orientable fronts. Our implementation features two reciprocal procedures, a forward ‘front parameterization’ that constructs a parameterization of a front given a level set field and a backward ‘field construction’ that constructs an approximation of the signed normal distance to the front, given a parameterized representation of the front. These reciprocal procedures are used to achieve and maintain high spatial accuracy. Close to the front, precise computation of the normal distance is carried out by requiring that displacement vectors from grid points to the front be along a normal direction. For front curves in two dimensions, a cubic interpolation scheme is used, and G ¹ surface parameterization based on triangular patches is used for the three-dimensional implementation to compute the distances from grid points near the front. To demonstrate this new, high accuracy method we present validations and show examples of combustion-like applications that include detonation shock dynamics, material interface motions in a compressible multi-material simulation and the Stephan problem associated with dendrite solidification.